Alpine CD Player CDE 7853E User Manual

 
 
ENGLISH  
Contents  
Operating Instructions  
CD Player Operation  
Inserting/Ejecting Disc ................................... 10  
Normal Play and Pause ................................... 10  
Music Sensor (Skip)........................................ 10  
Fast Forward and Backward ........................... 10  
Repeat Play ..................................................... 11  
M.I.X. (Random Play) .................................... 11  
Scanning Programmes .................................... 11  
Controlling CD Changer (Optional)  
WARNING  
WARNING .................................................. 2  
CAUTION ................................................... 2  
PRECAUTIONS ......................................... 2  
Basic Operation  
Detaching the Front Panel................................. 4  
Attaching the Front Panel ................................. 4  
Initial System Start-Up ..................................... 4  
Turning Power On and Off ............................... 4  
Subwoofer On and Off  
(CDM-7854E only) ..................................... 11  
Information  
In Case of Difficulty ....................................... 12  
Specifications .................................................. 13  
(CDM-7854E only) ....................................... 5  
Adjusting Volume/Bass/Treble/  
Installation and Connections  
Warning ........................................................... 14  
Caution ............................................................ 14  
Precautions ...................................................... 14  
Installation ...................................................... 15  
Connections .................................................... 16  
Balance (Between Left and Right)/  
Fader (Between Front and Rear) ................... 5  
Turning Loudness On/Off (CDE-7853E only) . 5  
Audio Mute Function ........................................ 5  
BBE Mode On/Off  
(CDM-7854E only) ....................................... 5  
Setting Bass Frequency ..................................... 5  
Displaying Time................................................ 6  
Setting Time ...................................................... 6  
Radio Operation  
Manual Tuning .................................................. 7  
Automatic Seek Tuning .................................... 7  
Manual Storing of Station Presets .................... 8  
Automatic Memory of Station Presets .............. 8  
Storing into Direct Access Preset (D.A.P.)  
Band............................................................... 9  
Tuning to Preset Stations .................................. 9  
1-EN  
 
WARNING  
WARNING  
CAUTION  
The exclamation point within an equilateral  
triangle and "WARNING" are intended to alert  
the user to the presence of important  
operating instructions.  
The exclamation point within an equilateral  
triangle and "CAUTION" are intended to alert  
the user to the presence of important  
operating instructions.  
Failure to heed the instructions will result in  
severe injury or death.  
Failure to heed the instructions can result in  
injury or material damage.  
DO NOT DISASSEMBLE OR ALTER.  
Doing so may lead to accident, fire or electric shock.  
DO NOT BLOCK VENTS OR RADIATOR PANELS.  
Blocking them may cause heat to build up inside and may  
result in fire.  
KEEP SMALL ARTICLES OUT OF THE REACH OF  
CHILDREN.  
STOP THE VEHICLE IF UNIT OPERATION MIGHT  
INTERFERE WITH DRIVING.  
If swallowed, consult a physician immediately.  
USE THE CORRECT AMPERE RATING WHEN  
REPLACING FUSES.  
PRECAUTIONS  
Temperature  
Failure to do so may result in fire or electric shock.  
Be sure the temperature inside the vehicle is between  
+60°C (+140°F) and –10°C (+14°F) before turning your  
unit on.  
HALT USE IMMEDIATELY IF A PROBLEM APPEARS.  
When problems occur such as a lack of sound or video,  
foreign objects inside the unit, smoke coming out, or  
noxious odors, stop use immediately and contact the  
dealer where you bought the equipment. Failure to do so  
may result in an accident or injury.  
Moisture Condensation  
You may notice the CD playback sound wavering due to  
condensation. If this happens, remove the disc from the  
player and wait about an hour for the moisture to  
evaporate.  
DO NOT OPERATE THE EQUIPMENT OR LOOK AT  
THE SCREEN WHILE DRIVING THE VEHICLE.  
Operating the equipment may distract the driver from  
looking ahead of the vehicle and cause accident. Always  
stop the vehicle in a safe location before operating this  
equipment.  
Damaged Disc  
Do not attempt to play cracked, warped, or damaged  
discs. Playing a bad disc could severely damage the  
playback mechanism.  
DO NOT RAISE THE VOLUME EXCESSIVELY.  
Keep the volume at a level where you can still hear  
outside noises while driving. Driving while unable to hear  
outside noises could be the cause of accident.  
Maintenance  
If you have problems, do not attempt to repair the unit  
yourself. Return it to your Alpine dealer or the nearest  
Alpine Service Station for servicing.  
DO NOT USE THIS EQUIPMENT FOR PURPOSES  
OTHER THAN STATED FOR THE VEHICLE.  
Failure to do so may result in electric shock or injury.  
DO NOT PLACE FOREIGN OBJECTS IN INSERTION  
SLOTS OR GAPS.  
Do not insert hands, fingers or foreign objects in the disc  
or cassette insertion slots, or in gaps during monitor  
startup/storage. Doing so may result in personal injury or  
damage to the equipment.  
2-EN  
 
Installation Location  
Never Attempt the Following  
Make sure the CDM-7854E/CDE-7853E will not be  
installed in a location subjected to:  
Do not grip or pull out the disc while it is being pulled  
back into the player by the automatic reloading  
mechanism.  
Do not attempt to insert a disc into the unit when the unit  
power is off.  
Direct sun and heat  
High humidity and water  
Excessive dust  
Excessive vibrations  
Handling the Detachable Front Panel  
Do not expose to rain or water.  
Do not drop or apply shock.  
Correct Handling  
Inserting Discs  
Do not drop the disc while handling. Hold the disc so you  
will not leave fingerprints on the surface. Do not affix  
tape, paper, or gummed labels to the disc. Do not write on  
the disc.  
Your player accepts only one disc at a time for playback.  
Do not attempt to load more than one disc.  
Make sure the label side is facing up when you insert the  
disc. Your player will automatically eject any disc that is  
inserted incorrectly. If the player continues to eject a  
correctly inserted disc, push the Reset switch (located  
behind the detachable front panel) with a pointed object  
such as a ball-point pen.  
CORRECT  
Playing a disc while driving on a very bumpy road may  
result in skips, but this will not scratch the disc or damage  
the player.  
INCORRECT  
CORRECT  
New Discs  
As a protective measure to prevent the CD from jamming,  
the CD player will automatically eject discs with irregular  
surfaces or inserted incorrectly. When a new disc is  
inserted into the player and ejected after initial loading,  
using your finger, feel around the inside of the centre hole  
and outside edge of the disc. If you feel any small bumps  
or irregularities, this could inhibit proper loading of the  
disc. To remove the bumps, rub the inside edge of the hole  
and outside edge of the disc with a ball-point pen or other  
such instrument, then insert the disc again.  
Disc Cleaning  
Fingerprints, dust, or soil on the surface of the disc could  
cause the CD player to skip. For routine cleaning, wipe  
the playing surface with a clean, soft cloth from the centre  
of the disc to the outer edge. If the surface is heavily  
soiled, dampen a clean, soft cloth in a solution of mild  
neutral detergent before cleaning the disc.  
Centre  
Hole  
Centre  
Hole  
New  
Disc  
Bumps  
Outside  
(Bumps)  
Disc Accessories  
There are various accessories available on the market for  
protecting the disc surface and improving sound quality.  
However, most of them will influence the thickness and/or  
diameter of the disc. Using such accessories can cause the  
disc to be out of standard specifications and may create  
operational problems. We recommend not using these  
accessories on discs played in Alpine CD players.  
Irregular Shaped Discs  
Be sure to use round shape discs only for this unit and  
never use any special shape discs.  
Use of special shape discs may cause damage to the  
mechanism.  
Transparent Sheet  
Disc Stabilizer  
3-EN  
 
Basic Operation  
MODE / BBE  
(LOUD)  
PWR  
MUTE  
B.C.  
c
2
1
f UP  
DN g  
Detaching the Front Panel  
Initial System Start-Up  
1
2
3
Press the PWR (Power) button for more than 3  
seconds to turn off the power.  
Immediately after installing or applying power to the  
unit, it should be initialized. To do this, first, remove  
the detachable front panel. Behind the front panel, to  
the right of the connector, there is a small hole.  
Using a pencil or other pointed object, press the red  
reset switch mounted behind this hole to complete  
the initialization procedure.  
Press the (Release) button at lower left corner  
until the front panel pops out.  
Grasp the left side of the front panel and pull it  
out.  
1
Reset switch  
NOTES  
The front panel may become hot in normal usage  
(especially the connector terminals), this is not  
malfunction.  
Turning Power On and Off  
To protect the front panel, place it in the supplied  
carrying case.  
1
Press the PWR (Power) button to turn on the  
unit.  
NOTE  
The unit can be turned on by pressing any other button  
except the eject c button.  
The volume level gradually increases to the previous  
level you were listening to before the unit was turned  
off. Press the PWR button for more than 3 seconds  
to turn off the unit.  
Attaching the Front Panel  
1
First, insert the right side of the front panel into  
the main unit. Align the 2 small holes on the front  
panel with the 2 projections on the main unit.  
NOTE  
The very first time the power is turned on, the volume  
will start from level 12, the BBE will be on in the tuner  
mode*, and the LOUD function will be on**.  
* CDM-7854E only.  
2
Push the left side of the front panel until it locks  
firmly into the main unit.  
2
** CDE-7853E only.  
1
NOTE  
Before attaching the front panel, make sure that there is  
no dirt or dust on the connector terminals and no foreign  
object between the front panel and the main unit.  
4-EN  
 
Subwoofer On and Off (CDM-7854E Audio Mute Function  
only)  
Activating this function will instantly lower the  
volume level by 20 dB.  
1
Press and hold the c(Eject) button for at least 3  
seconds.  
With each press, subwoofer is toggled On or Off.  
1
Press the MUTE button to activate the MUTE  
mode. The audio level will decrease by about  
20 dB.  
NOTES  
Initial mode is "Subwoofer OFF."  
Set to "Subwoofer OFF" unless the subwoofer is used.  
When the subwoofer is turned on, the subwoofer  
output level can be adjusted. For more details, refer to  
the Adjusting Volume/Bass/Treble/Balance/Fader.  
Pressing the MUTE button again will bring the  
audio back to its previous level.  
BBE Mode On/Off  
(CDM-7854E only)  
Adjusting Volume/Bass/Treble/  
Balance (Between Left and Right)/  
Fader (Between Front and Rear)  
The BBE (Barcus Berry Electronics) processor  
installed in this unit is designed to correct the  
phase distortion inherent in most loudspeaker  
designs. Ensuring the phase integrity of the signal  
driving the speakers improves the accurate  
reproduction of the sound.  
1
Press the MODE button repeatedly to choose  
the desired mode.  
Each press changes the modes as follows:  
VOL  
BAS  
TRE  
FAD ←  
BAL ←  
1
Press and hold the BBE button for at least 2  
seconds to turn on the BBE mode.  
Each press toggles between the BBE on and off  
modes.  
NOTES  
If the 5 or 6 button is not pressed in 5 seconds after  
selecting the BASS, TREBLE, BALANCE, or FADER  
mode, the unit automatically sets in the VOLUME  
mode.  
When the subwoofer is set to ON, the level of the  
subwoofer can be adjusted (CDM-7854E only).  
Setting Bass Frequency  
The bass control centre frequency can be set at  
60, 80, 100 or 200 Hz.  
2
Press the 5 and 6 buttons until the desired  
sound is obtained in each mode.  
NOTE  
1
2
Press and hold the B.C. (Bass Control) button  
for at least 3 seconds to turn on the bass control  
settings.  
The settings of the Bass and Treble will be individually  
memorized for each source (FM, AM and CD) until the  
setting is changed. Depending on the connected devices,  
some functions and display indications do not work.  
Press the DN g or the f UP button to  
select the desired Bass centre frequency.  
Each press changes the centre frequency as  
follows: 60 Hz, 80 Hz, 100 Hz and 200 Hz.  
Turning Loudness On/Off  
(CDE-7853E only)  
Loudness introduces a special low- and high-  
frequency emphasis at low listening levels. This  
compensates for the ear's decreased sensitivity to  
bass and treble sound.  
NOTE  
If no buttons are pressed within 5 seconds, the bass  
control settings will be turned off automatically.  
3
Press the B.C. (Bass Control) button for more  
than 3 seconds to turn off the bass control  
settings.  
1
Press and hold the LOUD button for at least  
2 seconds to activate or deactivate the loudness  
mode.  
The display shows "LOUD" when the loudness  
mode is activated.  
5-EN  
 
Basic Operation  
CLK  
H
M
CT  
Displaying Time  
Setting Time  
1
Press the CLK (clock) button repeatedly until the  
clock time is displayed.  
Each press changes the modes as follows:  
1
While the clock time is displayed, press and  
hold the CLK (clock) button for at least 3  
seconds.  
The time indication will begin to blink.  
Radio mode.  
Clock priority  
mode  
2
3
4
Press the CT button while the time indication  
is blinking to set seconds to "0".  
Radio frequency  
Press the "H" button to adjust the hours while  
the time indication is blinking.  
CD Player/Changer(CDM-7854E only) modes  
Clock priority  
mode  
Track No.  
mode  
Playing time  
mode  
Press the "M" button to adjust the minutes  
while the time indication is blinking.  
The time indication will stop blinking 5 seconds  
after the last adjustment. The time will  
automatically be set.  
6-EN  
 
Radio Operation  
TUNE  
SOURCE  
BAND  
DN g  
f UP  
Manual Tuning  
Automatic Seek Tuning  
1
Press the SOURCE button until a radio  
frequency appears in the display.  
1
Press the SOURCE button until a radio  
frequency appears in the display.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
2
Press the BAND button repeatedly until the  
desired radio band is displayed.  
Each press changes the band:  
Each press changes the band:  
F1 F2 AM  
F1 F2 AM  
3
4
Press the TUNE button to illuminate the DX and  
SEEK indicators in the display.  
With the DX (Distance) mode activated, both  
strong and weak stations will be tuned in the  
Auto-Seek operation.  
Press again to return to the local mode. The DX  
indicator will turn off and the SEEK indicator will  
remain illuminated. Now, only strong stations will  
be tuned.  
3
4
Press the TUNE button repeatedly until "DX  
SEEK" and "SEEK" disappear from the display.  
NOTE  
The initial mode is DX SEEK.  
Press the DN g or f UP button to move  
downward or upward one step respectively until  
the desired station frequency is displayed.  
NOTE  
The ST indicator appears on the display when a Stereo  
FM station is tuned in.  
Press the DN g or f UP button to  
automatically seek for a station downward or  
upward respectively.  
The unit will stop at the next station it finds.  
Press the same button again to seek the next  
station.  
7-EN  
 
Radio Operation  
A.ME  
SOURCE  
Preset buttons (1 through 6)  
D.A.P./BAND  
Manual Storing of Station Presets  
Automatic Memory of Station  
Presets  
1
Select the radio band and tune in a desired radio  
station you wish to store in the preset memory.  
1
2
3
Press the SOURCE button to select the radio  
mode.  
2
Press and hold any one of the Preset buttons (1  
through 6) for at least 2 seconds until the  
station frequency on the display blinks.  
Press the BAND button repeatedly until the  
desired radio band is displayed.  
3
4
Press the Preset button into which you wish to  
store the station while the frequency display is  
blinking (within 5 seconds).  
The display stops blinking once the station has  
been memorized. The display shows the band,  
preset No. with a triangle (9) and station  
frequency memorized.  
Press and hold the A. ME button for at least 2  
seconds.  
The frequency on the display continues to  
change while the automatic memory is in  
progress.  
The tuner will automatically seek and store 6  
strong stations in the selected band. They will be  
stored into presets 1 to 6 buttons in order of  
signal strength.  
When the automatic memory has been  
completed, the tuner goes to the station stored in  
the preset location No. 1.  
Repeat the procedure to store up to 5 other  
stations onto the same band.  
To use this procedure for other bands, simply  
select the band desired and repeat the  
procedure.  
A total of 24 stations can be stored in the preset  
memory (6 stations for each band; FM1, FM2,  
AM and D.A.P.).  
NOTE  
If no stations are stored, the tuner will return to the  
original station you were listening to before the auto  
memory procedure began.  
NOTE  
If you store a station in a preset memory which already  
has a station, the current station will be cleared and  
replaced with the new station.  
8-EN  
 
Storing into Direct Access Preset  
(D.A.P.) Band  
Tuning to Preset Stations  
1
Press the SOURCE button to select the radio  
mode.  
A combination of radio stations in any band  
(up to 6 stations) can be manually preset into  
the D.A.P. band.  
2
Press the BAND button repeatedly until the  
desired band is displayed.  
To select the D.A.P. band, press and hold the  
D.A.P. button for more than 2 seconds until the  
D.A.P. indicator appears in the display.  
1
Press and hold the D.A.P. button for more than 2  
seconds until the D.A.P. indicator appears.  
Press the BAND button to select FM or AM.  
The selected band will be displayed.  
3
Press the station preset button that has your  
desired radio station in memory.  
To memorize stations onto the D.A.P. band,  
follow the steps for the Automatic or Manual  
Storing of Station Presets section above.  
The display shows the band, preset number with  
a triangle and frequency of the station selected.  
NOTE  
This function can be used together with the Automatic  
Memory Preset.  
To cancel the D.A.P. mode, press and hold the  
D.A.P. button for more than 2 seconds. The  
D.A.P. indicator will turn off.  
9-EN  
 
CD Player Operation  
- / J SOURCE  
RPT  
c
SCAN  
Disc Select buttons  
(1 through 6)  
DN g  
f UP  
M.I.X.  
Inserting/Ejecting Disc  
The display shows the track number and elapsed  
time of the track being played. When the last  
track is played back the player returns to the first  
track and begins playback from that point.  
1
Insert a CD half way into the slot with the label  
side facing up. The player automatically draws  
the disc into the disc compartment.  
If a CD is already loaded in the CD player, press  
the SOURCE button to select the CD mode.  
2
Press the -/J button to temporarily stop CD  
playback.  
To resume playback, press the -/J button  
again.  
The Disc indicator appears to show that a disc is  
loaded.  
Music Sensor (Skip)  
NOTE  
Three-inch (8cm) CD's can be used.  
1
Momentarily press the DN g button once  
during CD play to return to the beginning of the  
current track. If you wish to access the beginning  
of a track further back, repeatedly press until you  
reach the desired track.  
2
Press the c(Eject) button when you want to  
eject the CD.  
NOTES  
If the CD is not removed for several seconds after it  
has been ejected, the player automatically draws the  
CD into the compartment to protect the CD.  
Only compact discs containing the mark shown can be  
used.  
Press the f UP button once to advance to the  
beginning of the next track. If you wish to access  
the beginning of a track further ahead, press  
repeatedly until the desired track is reached.  
NOTE  
The music sensor feature is functional in the play or  
pause mode.  
We cannot fully guarantee the playback of CD-R (CD-  
Recordable). You cannot playback CD-RW (CD-  
ReWritable) on this unit.  
Fast Forward and Backward  
Normal Play and Pause  
1
Press and hold the DN g or f UP button to  
quickly move backward or forward until you  
reach the desired section of the track.  
1
Insert a CD. The CD player begins playback from  
the first track on the disc.  
10-EN  
 
Repeat Play  
Controlling CD Changer (Optional)  
(CDM-7854E only)  
1
Press the RPT(Repeat) button to play back  
repeatedly the track being played.  
The RPT indicator appears and the track will be  
played repeatedly.  
If an optional Alpine 6-disc CD Changer is  
connected to the 8-pin DIN connector (M-Bus) of  
the CDM-7854E, you can control the CD changer  
using the CDM-7854E.  
Press the RPT button again and select OFF to  
deactivate the repeat play.  
NOTE  
NOTE  
If a CD Changer is connected and the RPT ALL mode is  
selected, the unit repeatedly plays back all tracks on the  
disc selected (CDM-7854E only).  
The CD controls on the CDM-7854E for the CD changer  
operation are functional only when the CD Changer is  
interconnected with the CDM-7854E.  
REPEAT REPEAT ALL OFF  
1
2
Press the SOURCE button to activate the  
changer mode.  
The display shows the disc number and track  
number.  
NOTE  
In case a 6-disc CD changer is connected (CDM-7854E  
only):  
Press the "F" button to illuminate the "FUNC" indicator  
and go to step 1.  
Press the Disc Select buttons (1 through 6)  
corresponding to one of the discs loaded in the  
CD Changer. The selected disc number appears  
in the display and CD playback starts.  
M.I.X. (Random Play)  
1
Press the M.I.X. button in the play or pause  
mode.  
NOTES  
After selecting the desired disc, you can operate in the  
same way as for the CDM-7854E CD player.  
For details, please see the CD Player Operation  
section.  
If the "FUNC" indicator is illuminated the Disc Select  
buttons become nonfunctional.  
The M.I.X. indicator will illuminate and the tracks  
on the disc will be played back in a random  
sequence. After all the tracks on the disc have  
been played back once, the player will begin a  
new random sequence play until the M.I.X. mode  
is cancelled.  
To cancel M.I.X. play, press the M.I.X. button  
again to turn off the M.I.X.  
NOTE  
In case a 6-disc CD changer is connected (CDM-7854E  
only):  
Press the "F" button to illuminate the "FUNC" indicator  
and go to step 1.  
Scanning Programmes  
1
Press the SCAN button to activate the Scan  
mode.  
The first 10 seconds of each track will be played  
back in succession.  
To stop scanning, press the SCAN button and  
deactivate the Scan mode.  
NOTE  
In case a 6-disc CD changer is connected (CDM-7854E  
only):  
Press the "F" button to illuminate the "FUNC" indicator  
and go to step 1.  
11-EN  
 
Information  
CD  
In Case of Difficulty  
CD Player/Changer not functioning.  
• Out of operating temperature range +50˚C (+120˚F)  
for CD.  
- Allow the vehicle's interior (or trunk) temperature to  
cool.  
CD playback sound is wavering.  
• Moisture condensation in the CD Module.  
- Allow enough time for the condensation to evaporate  
(about 1 hour).  
If you encounter a problem, please review the  
items in the following checklist.This guide will  
help you isolate the problem if the unit is at  
fault. Otherwise, make sure the rest of your  
system is properly connected or consult your  
authorized Alpine dealer.  
CD insertion not possible.  
• A CD is already in the CD player.  
- Eject the CD and remove it.  
Basic  
No function or display.  
Vehicle's ignition is off.  
• The CD is being improperly inserted.  
- Make sure the CD is being inserted following  
instructions in the CD Player Operation section.  
Unable to fast forward or backward the CD.  
• The CD has been damaged.  
- Eject the CD and discard it; using a damaged CD in  
your unit can cause damage to the mechanism.  
CD playback sound skips due to vibration.  
• Improper mounting of the unit.  
- If connected following instructions, the unit will not  
operate with the vehicle's ignition off.  
• Improper power lead connections.  
- Check power lead connections.  
• Blown fuse.  
- Check the fuse on the battery lead of the unit; replace  
with the proper value if necessary.  
• Internal micro-computer malfunctioned due to  
interference noise etc.  
- Securely re-mount the unit.  
• Disc is very dirty.  
- Clean the disc.  
- Press the Reset button with a ball-point pen or other  
pointed article.  
• Disc has scratches.  
- Change the disc.  
CD playback sound skips without vibration.  
• Dirty or scratched disc.  
- Clean the disc; damaged disc should be replaced.  
Error displays (built-in CD player only)  
• Mechanical error  
- Press the c button. After the error indication  
disappears, insert the disc again. If the above-  
mentioned solution does not solve the problem,  
consult your nearest ALPINE dealer.  
Radio  
Unable to receive stations.  
• No antenna or open connection in cable.  
- Make sure the antenna is properly connected;  
replace the antenna or cable if necessary.  
Unable to tune stations in the seek mode.  
You are in a weak signal area.  
- Make sure the tuner is in the DX mode.  
• If the area you are in is a primary signal area, the  
antenna may not be grounded and connected properly.  
- Check your antenna connections; make sure the  
antenna is properly grounded at its mounting location.  
• The antenna may not be the proper length.  
- Make sure the antenna is fully extended; if broken,  
replace the antenna with a new one.  
Broadcast is noisy.  
• The antenna is not the proper length.  
- Extend the antenna fully; replace it if it is broken.  
• The antenna is poorly grounded.  
- Make sure the antenna is grounded properly at its  
mounting location.  
12-EN  
 
Indication for CD Changer  
– – – H  
Specifications  
FM TUNER SECTION  
Tuning Range  
87.5 – 108 MHz  
Mono Usable Sensitivity  
50 dB Quieting Sensitivity  
Alternate Channel Selectivity 80 dB  
9.3 dBf (0.8 µV/75 ohms)  
13.5 dBf (1.3 µV/75 ohms)  
• Protective circuit is activated due to high temperature.  
- The indicator will disappear when the temperature  
returns to within operation range.  
Signal-to-Noise Ratio  
Stereo Separation  
65 dB  
35 dB  
E - 01  
AM TUNER SECTION  
Tuning Range  
Sensitivity (IEC Standard)  
• Malfunction in the CD Changer.  
- Consult your Alpine dealer. Press the magazine eject  
button and pull out the magazine.  
531 – 1,602 kHz  
22.5 µV/27 dB  
Check the indication. Insert the magazine again.  
If the magazine cannot be pulled out, consult your  
Alpine dealer.  
CD PLAYER SECTION  
Frequency Response  
Wow & Flutter (% WRMS) Below measurable limits  
Total Harmonic Distortion  
Dynamic Range  
5 – 20,000 Hz (±1 dB)  
• Magazine ejection not possible.  
- Press the magazine eject button. If the magazine does  
not eject, consult your Alpine dealer.  
0.008% (at 1 kHz)  
95 dB (at 1 kHz)  
105 dB  
Signal-to-Noise Ratio  
Channel Separation  
85 dB (at 1 kHz)  
– – – –  
GENERAL  
Power Requirement  
14.4 V DC  
(11–16 V allowable)  
40 W × 4  
• No magazine is loaded into the CD Changer.  
- Insert a magazine.  
Maximum Power Output  
Maximum Pre-Output Voltage 2 V/10 k ohms  
T – – –  
Bass  
±14 dB at 30 Hz  
±14 dB at 10 kHz  
1.5 kg (3 lbs. 5 oz)  
Treble  
Weight  
• No indicated disc.  
- Choose another disc.  
CHASSIS SIZE  
Width  
Height  
178 mm (7")  
50 mm (2")  
EEEE  
Depth  
155 mm (6-1/8")  
• Misconnection or disconnection of CD Changer.  
- Check connection between CD Changer and control  
unit.  
NOSEPIECE SIZE  
Width  
Height  
Depth  
170 mm (6–3/4")  
46 mm (1-13/16")  
18 mm (11/16")  
Due to continuous product improvement, specifications and  
design are subject to change without notice.  
13-EN  
 
Installation and Connections  
Before installing or connecting the unit, please  
read the following and pages 2 and 3 of this  
manual thoroughly for proper use.  
Caution  
USE SPECIFIED ACCESSORY PARTS AND INSTALL  
THEM SECURELY.  
Warning  
Use of other than designated parts may damage this unit  
internally or may not securely install the unit in place as  
parts that come loose may create hazards.  
USE ONLY VEHICLES WITH A 12 VOLT NEGATIVE (–)  
GROUND.  
DO NOT INSTALL IN LOCATIONS WITH HIGH  
MOISTURE OR DUST.  
A high incidence of moisture or dust that penetrates into  
this unit may cause smoke or fire.  
Check with your dealer if you are not sure. Failure to do  
so may result in fire or electric shock.  
BEFORE WIRING, DISCONNECT THE CABLE FROM  
THE NEGATIVE (–) BATTERY TERMINAL.  
Failure to do so may result in electric shock or injury due  
to electrical shorts.  
Precautions  
DO NOT CUT AWAY THE WIRE SHEATH AND USE  
POWER FOR OTHER EQUIPMENT.  
Doing so may exceed the current carrying capacity of the  
wire and result in fire or electric shock.  
Be sure to disconnect the cable from the (–) battery post  
before installing your CDM-7854E/CDE-7853E. This  
will reduce any chance of damage to the unit in case of  
a short-circuit.  
Be sure to connect the color coded leads according to  
the diagram. Incorrect connections may cause the unit  
to malfunction or damage to the vehicle’s electrical  
system.  
When making connections to the vehicle’s electrical  
system, be aware of the factory installed components  
(e.g. on-board computer). Do not tap into these leads to  
provide power for this unit. When connecting the CDM-  
7854E/CDE-7853E to the fuse box, make sure the fuse  
for the intended circuit of the CDM-7854E/CDE-7853E  
has the appropriate amperage. Failure to do so may  
result in damage to the unit and/or the vehicle. When in  
doubt, consult your ALPINE dealer.  
The CDM-7854E/CDE-7853E uses female RCA-type  
jacks for connection to other units (e.g. amplifier)  
having RCA connectors. You may need an adaptor to  
connect other units. If so, please contact your  
authorized ALPINE dealer for assistance.  
DO NOT INSTALL IN LOCATIONS WHICH MIGHT  
HINDER VEHICLE OPERATION OR CREATE  
HAZARDS FOR VEHICLE OCCUPANTS.  
Doing so may obstruct forward vision or hamper  
movement.  
DO NOT CONTACT, DAMAGE OR OBSTRUCT PIPES,  
FLUID LINES OR WIRING WHEN DRILLING HOLES.  
Failure to take such precautions may result in fire or cause  
an accident or injuries.  
DO NOT USE NUTS OR BOLTS IN THE BRAKE  
SYSTEM WHEN MAKING INSTALLATION OR  
GROUND CONNECTIONS.  
Never use safety-related parts such as bolts or nuts in the  
steering or brake systems or tanks to make wiring  
installations or ground connections. Using such parts  
could disable control of the vehicle and cause brake  
failure, other accident or injury.  
Be sure to connect the speaker (–) leads to the speaker  
(–) terminal. Never connect left and right channel  
speaker cables to each other or to the vehicle body.  
MAKE THE CORRECT CONNECTIONS.  
Failure to do so may cause fire or accident to occur.  
IMPORTANT  
ARRANGE THE WIRING SO IT IS NOT CRIMPED OR  
Please record the serial number of your unit in the  
space provided below and keep it as a permanent  
record. The serial number plate is located on the  
bottom of the unit.  
PINCHED.  
Route the cables and wiring so as not to be crimped by  
moving parts or make contact with sharp or pointed spots  
which might damage the wiring. Failure to do so may  
cause failure of unit or vehicle.  
SERIAL NUMBER:  
HAVE THE WIRING AND INSTALLATION DONE BY  
EXPERTS.  
The wiring and installation of this unit requires special  
technical skill and experience. To ensure safety, always  
contact the dealer where you purchased this unit to have  
the work done.  
INSTALLATION DATE:  
INSTALLATION TECHNICIAN:  
PLACE OF PURCHASE:  
14-EN  
 
3
Installation  
Mounting Sleeve  
(Included)  
1
Dashboard  
No Pressure Here  
Lock Pin  
Slide the CDM-7854E/CDE-7853E into the  
dashboard. When the unit is in place, make sure the  
locking pins are fully seated in the down position.  
This can be done by pressing firmly in on the unit  
while pushing the locking pin down with a small  
screwdriver. This ensures that the unit is properly  
locked and will not accidentally come out from the  
dashboard. Install the Detachable Front Panel.  
¢
No Pressure Here  
CDM-7854E/CDE-7853E  
Remove the Detachable Front Panel (refer to page 4).  
Slide mounting sleeve from main unit (see “Removal”  
on this page).  
Slide the mounting sleeve into the dashboard.  
Removal  
NOTE  
1 Remove the DETACHABLE FRONT PANEL.  
2 Use a small screwdriver (or similar tool) to push  
the locking pins to the "up" position (see above  
drawing). As each pin is unlocked, gently pull out  
on the unit to make sure it does not re-lock before  
unlocking the second pin.  
Please examine the installation. Make certain that no  
external pressure is applied to either the top of the unit  
or the removable nosepiece.  
Screw  
2
3 Pull the unit out, keeping it unlocked as you do  
so.  
Hex Nut (M5)  
∗∗  
<JAPANESE CAR>  
Bolt Stud  
Metal  
Mounting  
Strap  
Face Plate  
CDM-7854E/CDE-7853E  
Chassis  
Ground Lead  
Reinforce the head unit with the metal mounting  
strap (not supplied). Secure the ground lead of the  
Screws (M5 × 8)  
(Included)  
unit to a clean metal spot using a screw ( ) already  
attached to the vehicle’s chassis.  
CDM-7854E/CDE-7853E  
NOTE  
Ground Lead  
For the screw marked **, use an appropriate screw for  
the chosen mounting location.  
Connect each input lead coming from an amplifier or  
equalizer to the corresponding output lead coming  
from the left rear of the CDM-7854E/CDE-7853E.  
Connect all other leads of the CDM-7854E/CDE-  
7853E according to details described in the  
CONNECTlONS section.  
Mounting Bracket  
NOTE  
Secure the ground lead of the unit to a clean metal spot  
using a screw ( ) already attached to the vehicle's  
chassis.  
15-EN  
 
Installation and Connections  
Connections  
Antenna  
2
3
POWER ANT  
Blue  
To power antenna  
REMOTE  
TURN-ON  
Blue/White  
To amplifier or equalizer  
(CDM-7854E only)  
IGNITION  
4
5
6
Red  
Yellow  
Black  
Ignition Key  
BATTERY  
GND  
7
Battery  
)
Grey  
9
!
Speakers  
SPEAKER  
RIGHT  
FRONT  
Grey/  
Black  
+
Front right  
1
Violet/  
Black  
"
#
SPEAKER  
RIGHT  
REAR  
8
Violet  
Green  
Rear right  
$
%
SPEAKER  
LEFT  
Green/  
Black  
REAR  
Rear left  
Front left  
White/  
Black  
&
(
SPEAKER  
LEFT  
FRONT  
White  
Speakers  
~
Amplifier  
Rear or Subwoofers∗  
(CDM-7854E only)  
,
CD Changer  
(Sold Separately)  
(CDM-7854E only)  
When Subwoofer is set to OFF: Output is from Rear speakers.  
When Subwoofer is set to ON: Output is from Subwoofer.  
For details on how to set the Subwoofer to ON/OFF, see “Subwoofer On and Off” on page 5.  
16-EN  
 
1 Antenna Receptacle  
% Left Rear (–) Speaker Output Lead (Green/  
Black)  
2 Power Antenna Lead (Blue)  
Connect this lead to the +B terminal of your power  
antenna, if applicable.  
& Left Front (–) Speaker Output Lead (White/Black)  
( Left Front (+) Speaker Output Lead (White)  
3 Remote Turn-On Lead (Blue/White) (CDM-  
7854E only)  
) Rear/Subwoofer RCA Connectors (CDM-7854E  
only)  
Connect this lead to the remote turn-on lead of your  
amplifier or signal processor.  
RED is right and WHITE is left.  
~ RCA Extension Cable (Sold Separately)  
4 Switched Power Lead (Ignition) (Red)  
Connect this lead to an open terminal on the vehicle's  
fuse box or another unused power source which  
provides (+)12V only when the ignition is turned on  
or in the accessory position.  
+ DIN Connector (CDM-7854E only)  
Connect this to the DIN connector on the CD  
Changer.  
, DIN Extension Cable (Sold Separately)  
NOTE  
5 Battery Lead (Yellow)  
Connect this lead to the positive (+) post of the  
vehicle's battery.  
Older Alpine CD Changer came with standard, straight  
type DIN connectors. In installations where an L-type  
connector would simplify installation, the Alpine 491002  
Adaptor can be used (Sold Separately).  
6 Ground Lead (Black)  
Connect this lead to a good chassis ground on the  
vehicle. Make sure the connection is made to bare  
metal and is securely fastened using the sheet metal  
screw provided.  
7 Fuse Holder (15A)  
8 Power Supply Connector  
9 Right Front (+) Speaker Output Lead (Grey)  
! Right Front (–) Speaker Output Lead (Grey/  
Black)  
" Right Rear (–) Speaker Output Lead (Violet/  
Black)  
# Right Rear (+) Speaker Output Lead (Violet)  
$ Left Rear (+) Speaker Output Lead (Green)  
To prevent external noise from entering the audio system.  
Locate the unit and route the leads at least 10cm away from the car harness.  
Keep the battery power leads as far away from other leads as possible.  
Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.  
If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries  
various Alpine noise suppressors, contact them for further information.  
Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.  
17-EN  
 

Adaptec Network Card Wireless Access Point User Manual
Air King Ventilation Hood 100 CFM User Manual
Aiwa Car Stereo System CDC X427 User Manual
Allstar Products Group Garage Door Opener 8822 User Manual
Alto Shaam Kitchen Entertainment Center 500 S Series User Manual
Alto Shaam Microwave Oven 714ES User Manual
Amana Dishwasher W10261418A User Manual
American Standard Outdoor Shower 4834Y1SW User Manual
AMX Universal Remote FG148 04 User Manual
Barco Cyclometer R5976426 User Manual