AMX Universal Remote FG148 04 User Manual

Quick Start Guide  
Mio Modero® R-4 Remote  
Mio R-4 (FG148-04) Specifications (Cont.)  
Overview  
®
The Mio Modero R-4 remote (FG148-04) provides custom control features,  
including a full-color touchscreen, contained in an elegant handheld  
rechargeable device. The R-4 communicates with a NetLinx master via a  
Top Components  
• LED - blue backlit buttons indicate device is awake  
• LCD - high resolution (240x320) 76800 pixels with  
backlight and touch overlay  
• Pushbuttons - the power button is red backlit; the rest  
are blue backlit buttons. 29 buttons total  
®
wireless ZigBee network. Use TPDesign4 (TPD4) to program this device. The  
R-4 uses a mini-USB port for transferring programming files.  
Rear Components  
Dimensions (HWD)  
• Programming Port  
• Battery Door  
• Rechargeable Battery Connection  
Note: The R-4 requires the latest versions of the TPDesign4 application, and the  
AMX USB LAN driver (available for download from www.amx.com):  
TPDesign4 - v2.7 (build 545 or higher)  
AMX USB LAN - v2.01.05 (or higher)  
9.50 x 2.00 x .74 (241.3 mm x 50.8 mm x 18.80 mm)  
Supported  
Languages:  
• English  
• Spanish  
• French  
• Italian  
• Portuguese  
• Arabic  
• Russian  
• Japanese  
• Thai  
• Hindi  
1
Touch Screen  
• Greek  
• Korean  
• German  
• Simplified Chinese  
Certifications:  
Weight  
• FCC  
• CE  
• IEC-60950  
• .45 lbs (20 g) without batteries  
• .55 lbs (25 g) with batteries  
Operating  
Environment  
• Operating Temperature: 0° to 40° C (32° to 104° F)  
• Storage Temperature: -20° to 70° C (-4° to 158° F)  
1 - Power  
2 - Guide  
3 - Exit  
Included Items  
• Mio-RBP Rechargeable Lithium-ion Battery (FG147-10)  
4 - Menu  
5 - Information  
6 - Move Up  
7 - Move Down  
8 - Move Left  
9 - Move Right  
10 - Select  
Optional Keypads:  
• MIO-R4-KP-ITALIAN (FG148-141)  
• MIO-R4-KP-FRENCH (FG148-142)  
• MIO-R4-KP-ARABIC (FG148-143)  
• MIO-R4-KP-CHINESE (FG148-144)  
20  
19  
4
5
3
Other AMX  
Equipment  
• CC-USB Programming cable (FG10-5965)  
• Mio-RCC Charging Base (FG147-02) with power supply  
• NXR-ZGW (FG5791-01)  
6
11 - Volume Up  
12 - Volume Down  
13 - Channel Up  
14 - Channel Down  
15 - Last Viewed  
16 - Mute  
17 - Input  
18 - Enter  
19 - Back/Home  
20 - Up/Down Touch Screen Navigation  
• NXR-ZRP (FG5791-02)  
8
10  
9
Inserting the Lithium-Ion Battery Into The Mio R-4  
To install your Lithium-Ion battery into the Mio R-4:  
2
7
1.  
2.  
3.  
Flip and turn the Mio R-4 so that the buttons are facing away from you and  
the device is upside down.  
13  
14  
11  
15  
Holding the device in both hands, place your thumbs on the battery door  
and slide the battery door free.  
16  
Connect the terminal end of the Lithium-Ion battery to the port shown in  
FIG. 2. It may be necessary to use a thin, blunt non-conductive object to  
seat the battery connector fully within its port. (Note: Make sure that the  
battery wires run alongside the battery in the compartment as shown in  
FIG. 2. Otherwise, the wires may be damaged or the battery door may not  
close properly.)  
12  
17  
4.  
Replace the battery door, and slide it to lock it in place.  
18  
Installing a Supported Language Keypad  
1.  
Remove the battery door (See Inserting the Lithium-Ion Battery Into the  
Mio R-4) and remove the battery.  
Numeral Keypad  
2.  
3.  
4.  
5.  
Unscrew the 6 screw points.  
FIG. 1 Mio Modero R-4 Remote  
Turn the unit over so the buttons are facing you.  
Lift the top assembly away from the PCB.  
If necessary, push out the standard buttons from the front of the top assem-  
bly.  
Drop in your language pad and verify the alignment with the guide posts on  
the PCB.  
Place the top assembly back down on the PCB and return the unit over,  
exposing the 6 screw points.  
Tighten the 6 screw points.  
Touch And Tilt Sensor  
The Mio R-4 wakes up upon touching either the chrome side rails or pressing a  
button. If the remote times out when holding it, you can reawaken the device by  
tilting it. Errant jostling, such as a bumped table, will not wake the device unless  
you are holding it.  
6.  
7.  
Specifications  
8.  
9.  
Mio R-4 (FG148-04) Specifications  
Reinstall the battery, replace the battery door, and slide the door to lock it in  
place.  
Battery  
Rechargeable Lithium-Ion  
Using the Programming Jack on the Mio R-4  
Transmission  
Frequencies  
• ZigBee RF wireless network  
The programming jack located on the back of the Mio R-4 (FIG. 2) is used for  
communication between the device and TPDesign4. The programming jack  
uses a CC-USB Programming cable, USB to mini USB (FG10-5965). You can  
order the programming cable from AMX if you do not have one. While loading  
your configuration file, make sure the device is situated in the charging cradle.  
Transmission  
Range  
• 100 feet (30.48m).  
Memory  
• 32 Mbytes of FLASH  
• 64 Mbytes of SDRAM  
1.  
From the System Settings page of the Protected Settings Menu (see  
Protected Settings), set the Master Connection to USB.  
 

2Wirer HDCR 1230G User Manual
Acer Projector 1100E User Manual
AC International Styling Iron AC8TC User Manual
Air King Fan 3C614D User Manual
Albatron Technology Computer Hardware PX845PEV 800 User Manual
Aleratec Computer Accessories 350117 User Manual
Amana Refrigerator SBD21VE User Manual
Ask Proxima Projector IN35W User Manual
Axis Communications Digital Camera 215 PTZ E User Manual
BC Speakers Portable Speaker DE1050 User Manual